Jobsite Took Box Kobalt 60 Inch Review Youtube

The updated Kobalt Portable Tabular array Saw KT10152 changes only a few things from the upkeep-friendly KT1015 chore site table saw we reviewed a few years ago. Kobalt removed the outfeed support but increased the left rip capacity by iii-inches. They besides adapted the sliding rip fence and so information technology now locks into place with a single latch for fast setting.

Pros

• Affordable toll
• Powerful 15-amp motor
• Included stand and depression weight make information technology easily maneuverable
• Sliding debate system is more than than yous'd wait from a budget table saw
• Cuts 2x, HardiePlank, and even Durock with ease

Cons

• Saw'south weight, footprint, and smaller tabular array surface brand it hard to accurately cut canvas appurtenances
• Curved legs extend well beyond the end of the tabular array creating a trip hazard

Recommendation

Kobalt significantly reduced the weight of this saw from its predecessor and added iii inches of rip capacity. Perchance the most significant change is in the sliding contend—a common gripe about the last version—that now has one latch instead of two. Nosotros found it much easier to set and accommodate—almost like a premium characteristic on this budget-friendly saw. The saw'south low weight and smaller table surface make it ill-suited for ripping sheet goods. It'southward got ample power to cut 2x, cement lath, and more. Finally, the curved legs extend pretty far past the edge of the table creating a trip hazard/shin buster. Altogether, this new Kobalt job site tabular array saw is a capable budget performer that shows Kobalt is committed to quick improvements.

What's the Difference Between the Kobalt KT10152 and KT1015?

Except for its color scheme, you'd be difficult-pressed to rapidly pinpoint the differences between this Kobalt Portable Tabular array Saw (model KT10152) and its predecessor, the KT1015 we compared in our jobsite table saw head-to-head. Withal, if y'all moved both around, y'all'd find the new model to be much more than nimble. At just 65 pounds, it drops thirteen pounds from the KT1015. That's a big reward for portability but also a disadvantage for sure applications. We'll talk about in a moment.

The right rip capacity is the same at 30 inches only the left is upwards to 17 inches from 14. Possibly the nigh helpful change, though, is a redesign of the sliding fence from a double latch to a single latch. Kobalt Tools also added xanthous pins on the slide that register the fence square.

A common gripe nearly the KT1015 was its tough-to-square contend. It had two independent locks, but yous could just as easily lock information technology out of foursquare. A practiced debate will properly align itself from the front. Our crew found the fence like shooting fish in a barrel to square and—more importantly—it stayed square. The sliding mechanism actually feels like it belongs on a more expensive saw—it's very smoothen!

The Kobalt portable tabular array saw's carbide-tipped blade and 15-amp motor hands cutting through everything we had. We ripped enough of 2x material and even cement lath. No bug there. And the impressive stock blade is however in good shape after all our piece of work.

Some Difficulty Cutting Sheet Appurtenances

It'll be no surprise that cut sheet goods on the Kobalt KT10152 portable tabular array saw (or any jobsite saw) isn't ideal. Smaller saws tend to lend themselves to being tiptop-heavy. The lower weight on this tabular array saw actually works as a disadvantage in this example. Sheet goods make it a fleck too wobbly unless you've got some capable assistance or outfeed back up.

The fold-and-ringlet stand up, which we hash out below, is wider than the sawperpendicular to the blade but not parallel to it. As you push sheet goods through the bract, the stand doesn't supply plenty stability where you demand it the most.

Some Pros will opt to use rail saws for this application, withal the budget-friendly KT10152 comes in at near half the cost.

Kobalt KT10152 Table Saw Stand up

The lightweight Kobalt portable table saw works hand-in-hand with the included fold-and-whorl stand to arrive very maneuverable. We did, nevertheless, notice a bit of an issue once we set up upwardly the saw. Given what we just said about the width of the legs, it might seem contradictory to gripe about the curved leg sticking too far out. Only because it curves upwardly and further out into the workspace, it becomes quite a trip hazard and shin buster (we're speaking from experience!).

It'due south not a deal-breaker simply you should be wary of it when locating the saw in your workspace.

Toll

Nosotros've seen recent deals on the Kobalt portable table saw that really brand information technology a bargain. The regular price for the KT10152 sits at $329. Here's a await at some budget-friendly competitors:

• Skil 3410-02 x-in. tabular array saw (has as fixed stand up): $204.33
• Ryobi RTS23: $269
• DeWalt DW745S compact chore site table saw (fixed stand): $302.32
• Kobalt KT10152: $329
• Skil SPT70WT-01 10-in. portable worm drive table saw: $343.37

The Bottom Line

Kobalt has made some nice improvements to this tabular array saw. You get a large weight reduction for more portability. The fence clamping system now exhibits a much more confident machinery. Plus, you lot get a bit more rip capacity.

The saw besides has enough of power and it'southward hard to beat the maneuverability. The narrow base and light weight make it a piffling wobbly with larger stock or canvass appurtenances. Nosotros like the fold-and-curl stand overall, simply sentinel that the curved leg doesn't obstruct a pathway. For the price and performance, this budget-friendly saw should appeal to both DIYers and entry-level Pros.

Kobalt Portable Table Saw Specifications

• Model: KT10152
• Motor: 15-amps
• Speed (no load): 5000 RPM
• Micro-accommodate rip debate
• Bevel chapters: 45º
• Cut depth (45º / 90º): two.5 in. / 3.5 in.
• Dust chute: 2.v in.
• Bract Size (Inches): 10
• Rip capacity (Left/Right): 17 in. / 30 in.
• Table (WxL): 19.half-dozen ten 26.1 in.
• Pinnacle (to table): 34 in.
• Locking miter gauge
• Quick-folding stand with eight-in. wheels
• On-board storage for rip argue, miter gauge, bract guard, push stick, ability cord, and extra blades
• Weight: 65 lbs.
• Warranty: 3-year limited
• Price: $329

hutsellungthe.blogspot.com

Source: https://www.protoolreviews.com/kobalt-portable-table-saw-kt10152-review/

Share this post